H/C-100 GHOST IMAGE STAIN REMOVER PASTE 1 USG
DescriptionThis ghost remover is a paste ghost/image stain remover. H/C-100 is designed for the removal of cured ink stains.
A corrosive cleaning agent developed for the textile industry for screens.
High maximum strength. Caustic so please follow appropriate health and safety guidelines. Mix product thoroughly before using.
Will remove tough harsh ghosting and emulsion residue on the screen. Also recommended for removing Rhino screen films from your screens and also cured ink stains on the mesh.
Apply H/C-100 to the ink side of the screen using one of our Art2silkscreen cleaning brushes or scrub pads. Allow coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen.
Then low pressure rinse (flood rinse with tap water pressure), removing all chemicals from the screen. This step protects employees from caustic being splashed back during high pressure rinse. Then, high pressure rinse to remove any remaining stains.
A strong high pressure washer (165 barr) blast the screen. Wear suitable protective goggles and gloves.
WARNING: This is not a friendly chemcial and is for industrial use only, DO NOT allow contact with eyes or skin. This Ghost buster contains Sodium Hydroxide / Corrosive.
Write an online review and share your thoughts with other shoppers!